• LATEST2
• Our Research
• Research Outputs
  • Publications
  • Conference Proceedings
  • Invited Lectures

Invited Lectures

• Dr X. Zhou, Invited Lecture: “Electrochemical Methods and Surface Analysis in Corrosion Research”, Vrije Universiteit Brussel, Belgium (September 2013)
• Dr X. Zhou, Invited Lecture: “Grain Boundary Precipitation and Corrosion Behaviour of Al-Li alloy”, Constellium, Grenoble, France (September 2013)
• Dr X. Zhou, Invited Lecture: “Environmentally-Friendly Surface Treatment for Al-Li Alloy”, Beijing Institute of Aeronautical Materials, Beijing, China (August 2013)
• Dr J. Robson, Invited Lecture, Light Metals Technology Conference, Windsor, UK (July 2013)
• Professor G. E. Thompson, Plenary Lecture: “Development of Environmentally-Friendly Anodizing Conditions”, Italian Metallurgical Society, Naples, Italy (July 2013)
• Dr J. Quinta da Fonseca, Invited Lecture, Constellium, Grenoble, France (June 2013)
• Dr X. Zhou, Plenary Lecture: “New Development in Research for Corrosion Resistant Film on Aluminium Alloys”, The 3rd International Conference, Aluminium 21-Coatings, St Petersburg, Russia (June 2013)
• Dr J. Robson, Invited Lecture, Magnesium Technology Workshop, Madrid, Spain (May 2013)
  Professor M. Preuss, Invited Lecture: “Variant Selection in Ti Alloys”, BARC seminar series, Mumbai, India (February 2013)
• Dr J. Robson, Invited Lecture, Constellium CRV, Grenoble, France (January 2013)
• Dr J. Quinta da Fonseca, Invited Lecture, IOM3, Surrey, UK (December 2012)
• Dr X. Zhou, Invited Lecture: “Nanotomography of Localized Corrosion in Aluminium Alloys”, China State Key Laboratory for Marine Corrosion and Protection, Beijing, China (November 2012)
• Dr J. Quinta da Fonseca, Invited Lecture, IOM3, Surrey, UK (October 2012)
• Dr X. Zhou, Invited Lecture: “New Observation of Intergranular Corrosion in Aluminium Alloy”, The 16th Asian Pacific Corrosion Control Conference, Kaohsiung, Taiwan (October 2012)
• Dr J. Quinta da Fonseca, Invited Lecture, IMR, Shenyang, China (September 2012)
• Professor M. Preuss, Invited Lecture: “Ti and Related Research - Materials Performance”, Bao steel and IMR, Shenyang, China (September 2012)
• Dr X. Zhou, Invited Lecture: “Initiation and Propagation of IGC in AA2xxx Aluminium Alloys”, Airbus, UK (August 2012)
• Dr J. Robson, Invited Lecture, Welding Summer School, Leicester, UK (August 2012)
• Dr J. Robson, Invited Lecture, Magnesium Technology Conference, Canada (July 2012)
• Professor G. E. Thompson, Invited Lecture: “Revealing The Three Dimensional Internal Structure of Aluminium Alloys”, Aluminium Surface Science and Technology Symposium (ASST VI), Sorrento, Italy (May 2012)
• Professor G. E. Thompson, Invited Lecture: “In-SEM Tomography (Nano- and Micro-Tomography with 3View and XuM Capabilities)”, FESI-UK Forum for Engineered Structural Integrity Conferences and Related Continuing Professional Development, Manchester, UK (April 2012)
• Dr X. Zhou, Invited Lecture: “Corrosion Control of Aluminium Alloys for Aircraft Application” The 2nd International Symposium on Aeronautical Engineering, Santiago, Chile (March 2012)
• Professor M. Preuss, Invited Lecture: “Variant Selection in Ti Alloys”, Ti European Conference, Bristol, UK (March 2012)
• Dr J. Robson, Invited Lecture, The Minerals, Metals & Materials Society (TMS), Florida, USA (March 2012)
• Dr X. Zhou, Invited Lecture: “Near-Surface Microstructure and Anodic Film Growth on Aluminium Alloys”, Sapa Technology Centre, Sapa Group (February 2012)
• Professor G. E. Thompson, Plenary Lecture: “Fundamental Studies to Assist Development of Environmentally-Friendly Coatings on Aluminium Alloys”, Materials Science and Engineering Symposium, Doha, Qatar (February 2012)
• Dr X. Zhou, Invited Lecture: “Electron tomography of Aluminium Alloys” Constellium, Grenoble, France (December 2011)
• Professor G. E. Thompson, Plenary Lecture: “Fundamental Studies to Assist Development of Environmentally-Friendly Anodizing Treatments on Aluminium Alloys”, China (Ningbo) International Forum on Advanced materials and Commercialization, Ningbo (December 2011)
• Professor G. E. Thompson Plenary Lecture: “Environmentally-Friendly Anodising of Aluminium Alloys for Aerospace”, Corrosion & Prevention Conference, Adelaide, Australia (November 2010)
• Dr X. Zhou, Invited Lecture: “Nanotomography of Localised Corrosion in Aluminium Alloys”, The Australian Research Council (ARC) Centre of Excellence for Design in Light Metals Annual Conference, Melbourne, Australia (November 2011)
• Professor G. E. Thompson, Invited Lecture: “Environmentally-Friendly Anodizing of Aluminium Alloys”, 2nd International Conference on Light Metal Surface Finishing, Paris, France (November 2011)
• Professor G. E. Thompson Invited Lecture: “Reducing the Energy Cost of Anodizing”, Australasian Corrosion Association, Melbourne, Australia (November 2010)
• Dr J. Robson, Invited Lecture, European Conference on Aluminium Alloys (ECAA), Germany (October 2011)
• Dr J. Robson, Invited Lecture, MagNet Conference, Canada (October 2010)
• Dr J. Robson, Invited Lecture, EuroMat Conference, France (September 2011)
• Dr J. Robson, Invited Lecture, OPTIMoM Conference, Cambridge, UK (September 2010)
• Professor P. B. Prangnell, Invited Lecture: “Effect of Build Geometry on Texture and Grain Structure Development in Additive Layer Manufacture (ALM) of Ti-6Al-4V”, Thermec, Quebec, Canada (August 2011)
• Professor P. B. Prangnell, Invited Lecture: “Friction Spot Welding Dissimilar Materials with Rapid Cycle Times”, Thermec, Quebec, Canada (August 2011)
• Dr J. Robson, Invited Lecture, Thermec Conference, Quebec, Canada (August 2011)
• Dr J. Robson, Invited Lecture, PRICM Conference, Cairns, Australia (August 2010)
• Dr J. Robson, Invited Lecture, IPSUS Summer School, Germany (August 2010)